A CP potential survey in progress — meter and reference electrode in use.
Close interval surveys, remote monitoring and scheduled inspection — catching protection loss before it becomes a repair, not after.
An operator who needs to know whether a CP system is actually working — not assume it is until a coating failure or a classification survey says otherwise.
An ROV with a twin-cell probe follows the precise route of a subsea pipeline, recording pipe potentials and static reference potentials simultaneously to determine CP levels against known criteria.
Close interval and potential surveys against the −850 mV protection criterion.
Wireless CP monitoring instrumentation at remote or offshore locations.
Scheduled inspection programmes at defined frequencies per asset type.
Analysis of system performance against design parameters over time.
Documented findings, defects and recommendations for each asset.
Projected remaining service life based on measured performance trends.
| Standard | Applies to |
|---|---|
| Routine monitoring | Scheduled at frequencies matched to the asset and its risk profile |
| Annual inspection | Full CP system inspection performed on a yearly cycle by default |
| Analysis & recommendation | Findings analysed and recommendations made against system performance |
| Rectification | Complete solutions offered for any issues identified, not just a report |
A CP potential survey in progress — meter and reference electrode in use.
Most competitors design or manufacture. For inspection, monitoring & asset integrity, we do both, plus installation, commissioning and lifecycle monitoring — coordinated as one engagement.
Current demand calculation, anode/electrode placement, drawings.
Anodes cast through our regional manufacturing network; equipment engineered in.
In-house diving and marine installation teams, or yard-coordinated fitting.
System energised, potentials verified against the −850 mV criterion.
Scheduled monitoring, inspection, and life extension as the system ages.
Annual inspection is typical, though frequency and scope are scheduled against the specific asset and its risk profile.
Areas of under-protection against the design criterion, possible coating defects, and areas of stray current interference along the surveyed route.
Yes — wireless CP monitoring instrumentation can be incorporated at remote or offshore locations.
Recommendations are made based on the performance analysis, and we offer complete solutions for rectifying any issues identified.
Structured engineering enquiry — get a scoped preliminary brief, not a generic quote request.
Start a monitoring enquiry